Frantic Stamper Precision Die - Stitched Square Frames

 Click Picture to Zoom

Frantic Stamper Precision Die - Stitched Square Frames

Frantic Stamper FRA-DIE-010090

$26.99 + $3.29 shipping within the U.S.

Size: Largest Die is 3.75" x 3.75"

Usually ships in 8-10 days.

Item: FRA10090 - Type: Craft Dies.
This set of 3 dies creates several looks. For starters, the two larger dies cut a frame AND an inside piece at the same time. The frame features a row of faux stitching on the outside edge, and another row on the inside edge. The inner piece that is cut at the same time will have a double line of stitching on the outer edge.

The largest die measures 3.75" x 3.75" with an opening of 3"x3". The middle die measures 2.25" x 2.25" with an opening of 1.45" x 1.45". Finally, the smaller die makes a little stitched square measuring 0.75" x 0.75", which can be used to create fun checkered patterns.

These dies are great for creating shaker cards as they give you ample room for the double stick tape needed to make your frame.
123Stitch.com ships via the U.S. Postal Service to anywhere in the world. Orders to the U.S. typically arrive 3-5 days after we ship.

Shipping charges are shown in your shopping cart every time you add an item.

If you are not completely satisfied with any of our products, you can return it to us within 30 days for a full refund.

More Items Like Frantic Stamper Precision Die - Stitched Square Frames
Go to Page: 1  2  3  4  5  6  7  8  9  10  

Frantic Stamper Precision Die - Stitched Rectangle Frames by Frantic Stamper
This set of 3 dies creates several looks. For starters, the two larger dies cut a frame AND an inside piece at the same time. The frame features a row of faux stitching on the outside edge, and another row on the inside edge. The inner piece that is cut at the same time will have a double line of stitching on the outer edge.

The largest die measures 3.75" x 5" with an opening of 3.25" x 4.5". The middle die measures 2.5" x 3.5" with an opening of 2" x 3". Finally, the smaller die measures 1" x 1.75" with an opening of 0.5" x 1.25", perfect for small sentiments.

These dies are great for creating shaker cards as they give you ample room for the double stick tape needed to make your frame.

See More Items Like This
 
Frantic Stamper Precision Dies - Fancy Frames 1 by Frantic Stamper
Frantic Stamper Precision Die - Fancy Frames 1. This unique die will cut 4 frames + 1 rectangle all in one pass. Approx frame sizes: 3.75" x 5"; 3" x 4.3"; 2.12" x 3.3"; 1.6" x 2.8" + rectangle 0.8" x 2.1". Use the frames individually, or nest them on your card for an eclectic background effect.

See More Items Like This
 
Frantic Stamper Precision Die - Stitched Grassy Hill Edgers by Frantic Stamper
The stitched grassy hill edgers is a set of 2 dies, each 6" long. They work great to create landscape layers to anchor your animals or other elements and add depth, but can also be used as interesting card borders.

See More Items Like This
 
Frantic Stamper Precision Die - Flip Card Scalloped Square by Frantic Stamper
This "flip card" or "swing card" die has a lot of different uses. The scalloped square part cuts, while the 2 extending straight lines are score line which you align on the fold of your card. With this die, you can create swing cards, tent cards, z-fold cards and a variety of other kinetic cards. The scalloped semi circle measures 3.75" in height. Pair this die with the Bump Card Scalloped Square die set (FRA10009) to give you more options as well as layer pieces that will fit inside the scalloped square.

See More Items Like This
 
Frantic Stamper Precision Die - Bump Card Scalloped Square by Frantic Stamper
With the Bump Card Scalloped Square, you can create fun layers, gatefold cards and more. The scalloped Square measures 2.5" and the entire die measures 5.5" long. Unlike the "Flip Card" die, the straight legs of this die cut the paper allowing you to create a straight edge with a bumped out scalloped square.
The 2 layer squares measure 2.5" and 1.75". Pair this die with the Flip Card Scalloped Square die (FRA10110) for more options.

See More Items Like This
 
Frantic Stamper Precision Dies - Lace Handkerchief Frames by Frantic Stamper
Frantic Stamper Precision Die - Lace Handkerchief Frames. 4 dies. This series of Elementals dies are sized to work with the Card Panels, and to create perfectly framed A2 sized cards. This set features 3 frames and a corner accent piece in a vintage lace pattern. The largest frame is 4.25" x 5.5", with an open space measuring 3-5/8" x 4-7/8" (perfect for any of the card panels). The next frame measures 3.25" x 4.5", and the square frame is approximately 2.375" x 2.375". This pattern features faux stitching which creates the illusion of an old-fashioned embroidery border. As a bonus, you also get a matching small corner accent.

See More Items Like This
 
Frantic Stamper Precision Die - Stitched Cow by Frantic Stamper
The Stitched Cow die measures 2" x 2.375". With a darling stitched outline, this die is perfect for baby cards with a barnyard theme.

See More Items Like This
 
Frantic Stamper Precision Die - Stitched Pig by Frantic Stamper
The stitched piggy die measures 2.75" x 1.9". Use small print paper to give him a quilted patchwork look!

See More Items Like This
 
Frantic Stamper Precision Die - Stitched Horse by Frantic Stamper
The sweet stitched horsey is so darling for baby cards. Standing at 2.75" x 2.125", he almost resembles a certain little pony. Perfect for a little girl's card, or a baby card too!

See More Items Like This
 
Frantic Stamper Precision Die - Stitched Poultry by Frantic Stamper
The darling stitched hen and rooster dies will help you create a fun "country" feel card. The hen measures 1.55" x 1.875" and the rooster is 2" x 2.25". Use small print papers to emulate the look for patchwork quilts! Also great for baby cards.

See More Items Like This
 
Frantic Stamper Dies - Petal Squares In-Betweens by Frantic Stamper
This set of 7 dies coordinates with our Stitched Petal Squares (FRA9737) to create perfect layers. The 7 dies measure: 4.25", 3.75", 3.25", 2.75", 2.25", 1.75" and 1.25".

Frantic Stamper Precision Dies are made in the USA and will work with most leading table-top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Double Loop Frames by Frantic Stamper
Frantic Stamper Precision Die - Double Loop Frames. 5 dies. This series of Elementals dies are sized to work with the Card Panels, and to create perfectly framed A2 sized cards. This beautiful set features 3 frames and 2 accent pieces in an elegant double loop pattern. The largest frame is 4.25" x 5.5", with an open space measuring 3-3/4" x 5" (perfect for any of the card panels). The next frame measures 3.25" x 4.5", and the smallest frame is 2.25" x 3.5". These smaller frames allows them to be used for layered cards, or to accent a stamped image. All are proportionally sized for perfect border width on an A2 card. As a bonus, you also get a matching small corner accent and a 1.25" square with the same pattern.

(1 review)
See More Items Like This
 
Frantic Stamper Precision Dies - Picot Frames by Frantic Stamper
Frantic Stamper Precision Die - Picot Frames. 4 dies. This series of Elementals dies are sized to work with the Card Panels, and to create perfectly framed A2 sized cards. This set features 2 frames and 2 accent pieces in detailed picot pattern. The largest frame is 4.25" x 5.5", with an open space measuring 3-3/8" x 4-5/8" (perfect for use with any of the card panels, as it will cover just the border of the panel designs). The inner frame measures 3" x 4.25". As a bonus, you also get two matching small accent dies.

See More Items Like This
 
Frantic Stamper Dies - Stitched Squares by Frantic Stamper
This set of 3 stitched square dies is so versatile. Notice that we put stitching on both the inside and outside of the squares. Why? Simple... you can cut a stitched square from your card front and have not only a square window, but with stitching already done on the outside! The resulting cutout square will also have the stitching already done. Here's another idea: tape 2 squares to your cardstock (evenly spaced one inside the other), run through the machine and now you have a square frame with a double stitching line!

Sizes of the cut squares are: 3.125"; 2.125" and 1.25". Frantic Stamper Precision Dies are proudly made in the USA! Our dies work in all table top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Dies - Dotted Frames by Frantic Stamper
Set of 6 dies. The main die cuts out 5 dotted frames in one pass through the die cutting machine.

Frantic Stamper Precision Dies are proudly made in the USA! Our dies work in all table top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Stitched Scene Builder Edge by Frantic Stamper
Frantic Stamper Precision Die - Stitched Scene Builder Edgers (4 dies). Size: 6" long each.

See More Items Like This
 
Frantic Stamper Precision Dies - Stitched Bracket Edger by Frantic Stamper
Frantic Stamper Precision Die - Stitched Bracket Edger. Size: 6" x 1/2".

See More Items Like This
 
Frantic Stamper Precision Dies - 9 Spot Stitched Grid by Frantic Stamper
This 3.5"x3.5" die is used to create a stitched grid directly into your card front. It doesn't cut the border or frame. The grid forms a 9-patch of 1-1/16" square, perfect for adding little bows, buttons, or try our icon dies! Can't wait to see what you create with this die!

See More Items Like This
 
Frantic Stamper Dies - Elementals #14 Square Basics by Frantic Stamper
With this Elementals set, you will have so many pieces to build a card, including frames, tags, sentiment strips, etc. The scalloped square frame measures 3.75" x 3.75", which is the perfect size for a square card layer, or a square focal point on an A2 card, leaving you ample space for a sentiment. Frantic Stamper Precision Dies are made in the USA and will work with most leading table-top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Lattice Flower Square Panel by Frantic Stamper
Our square Lattice Flower panel measures 3.5" x 3.5". This is a great size to use for an A2 card, yet leaves you with a good amount of blank space for a stamped greeting. The lacy intricate design lends itself to so many looks. Because this is a repeatable pattern, it can easily be extended by cutting the die multiple times and lining up the cut pieces when adhering them to your project. Be sure to check out the matching Lattice Flower Accents die set (FRA9554) which are the same size as the pattern on this square panel. Frantic Stamper Precision Dies are made in the USA. Compatible with all leading consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Lattice Flower Square Panel by Frantic Stamper
Our square Lattice Flower panel measures 3.5" x 3.5". This is a great size to use for an A2 card, yet leaves you with a good amount of blank space for a stamped greeting. The lacy intricate design lends itself to so many looks. Because this is a repeatable pattern, it can easily be extended by cutting the die multiple times and lining up the cut pieces when adhering them to your project. Be sure to check out the matching Lattice Flower Accents die set (FRA9554) which are the same size as the pattern on this square panel. Frantic Stamper Precision Dies are made in the USA. Compatible with all leading consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Flying Geese Quilt Square by Frantic Stamper
Frantic Stamper Precision Die - Flying Geese Quilt Square. Grandma's favorite quilts keep us warm on a chilly spring evening. This 4"x4" quilt block features the popular flying geese pattern with stitched pieces. There is so much you can do with this die besides re-creating the traditional quilt square. If you omit the stitched triangles, you have an interesting framework which can be overlayed on a larger image. Or, you can use the stitched triangles alone on a card to make corners, borders, pinwheels and so much more! Let your creativity run wild with this die!! Need some sentiments to match this die? Try our Frantic Stamper Clear Stamp: Handmade Quilts (FRAS003)

(2 reviews)
See More Items Like This
 
Frantic Stamper Precision Dies - Square Vignette Bat Insert by Frantic Stamper
This 1.25" Halloween themed square die can be used on its own, or matched with our Scalloped Square Vignette die (FRA9607) and used in the center. The small size lends itself to many projects. Use a 1-3/8" square punch or die to create a clean layer border.

See More Items Like This
 
Frantic Stamper Precision Dies - Square Vignette Snowflake by Frantic Stamper
This 1.25" Winter themed square die can be used on its own, or matched with our Scalloped Square Vignette die (FRA9607) and used in the center. The small size lends itself to many projects. Use a 1-3/8" square punch or die to create a clean layer border.

See More Items Like This
 
Frantic Stamper Precision Dies - Basket Quilt Square by Frantic Stamper
Frantic Stamper Precision Die - Basket Quilt Square. Our second quilt block features a traditional country basket design. This block measures 4"x4". As with the Flying Geese Quilt Square (FRA9472), this block can also be used in different ways. When you cut it out, you get tons of geometric pieces which can be used to create other designs. For example, the stitched circle portion that comes out of the handle can create a wonderful stitched scalloped edge accent. Or, use the triangles to create corners, diamonds and square. This die is a must for the puzzle lover with a creative mind! Need some sentiments to match this die? Try our Frantic Stamper Clear Stamp: Handmade Quilts (FRAS003)

(2 reviews)
See More Items Like This
 
Frantic Stamper Precision Dies - Square Vignette Noel by Frantic Stamper
This 1.25" Christmas themed square die can be used on its own, or matched with our Scalloped Square Vignette die (FRA9607) and used in the center. The small size lends itself to many projects. Use a 1-3/8" square punch or die to create a clean layer border.

See More Items Like This
 
Frantic Stamper Dies - Dad Square Vignette Insert by Frantic Stamper
The Dad Square Vignette insert measures 1.25" x 1.25". It is designed to work alone or in conjunction with our Scalloped Square Vignette frame die (FRA9607). With a fun slanted fold DAD word, this die can be used on point (as a diamond) for a different perspective. Frantic Stamper Precision Dies are made in the USA and will work with most leading table-top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Dies - #18 - Stitched Bracket Squares by Frantic Stamper
The Stitched Bracket Squares add a fun element to your cards. These 2 sets are timeless in nature, and you will find yourself using them over and over. The largest die in this set measures 3.5" x 3.5" and features a swirl inlay detail. The other dies have stitching on both the outside and inside of the cutting line, giving you double duty for creating window apertures, and layers. The smallest square measures 0.375".

Made in the USA with 100% stainless steel. Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, Vaggabond, Boss Cut, and Grand Calibur. Some dies may require the use of a metal shim depending on your machine.

See More Items Like This
 
Frantic Stamper Dies - Pinprick Squares by Frantic Stamper
This set of 3 pinprick square dies is so versatile. Notice that we put pin holes on both the inside and outside of the squares. Why? Simple... you can cut a square from your card front and have not only a square window, but with pin holes already done on the outside! The resulting cutout square will also have the pinpricks already done. Here's another idea: tape 2 squares to your cardstock (evenly spaced one inside the other), run through the machine and now you have a square frame with 2 rows of pinholes. Super cute!

Sizes of the cut squares are: 3.125"; 2.125" and 1.25". Frantic Stamper Precision Dies are proudly made in the USA! Our dies work in all table top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Dies - Lattice Oval Frame by Frantic Stamper
Our Lattice Oval Frame is a Card Panel die measuring 3.75" x 5". It creates a lattice background with an oval opening measuring 2.2" x 2.95", perfect for framing your favorite quote.

Frantic Stamper Precision Dies are made in the USA and will work with most leading table-top consumer die cutting machines.

See More Items Like This
 
Frantic Stamper Precision Dies - Elementals #11 Bracket by Frantic Stamper
Frantic Stamper Precision Die - Elementals #11 Bracket Coved Label (set of 6 dies). This versatile set consists of an outer frame with a lovely swirl pattern and a bracketed opening, plus 5 sizes of the same shape label stepped in 1/2 inch increments. Frame Size: 4.25" x 5.5". Largest label: 3.5" x 4.5". Label #2: 3" x 4". Label #3: 2.5" x 3.5". Label #4: 2" x 3". Label #5: 1.5" x 2.5".

See More Items Like This
 
Frantic Stamper Precision Dies - Petite Sakuras by Frantic Stamper
Frantic Stamper Precision Die - Petite Sakuras. Approx sizes: 0.375", 0.5", 0.675" and 0.75". All these cherry blossoms are on ONE 3" square die, allowing you to cut several flowers in 1 pass. Layer them to create dimensional flowers. This die works well with our Cherry Blossom Branch (FRA9333).

(1 review)
See More Items Like This
 
Frantic Stamper Dies - Bracket Squares In-Betweens by Frantic Stamper
The Bracket Square In-Betweens add a fun element to your cards. These 2 sets are timeless in nature, and you will find yourself using them over and over. Measurements are 2.55", 1.95", 1.3", and 0.75". Made in the USA with 100% stainless steel. Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, Vaggabond, Boss Cut, and Grand Calibur. Some dies may require the use of a metal shim depending on your machine.

See More Items Like This
 
Frantic Stamper Precision Dies - Lattice Flower Accents by Frantic Stamper
The set of 2 Lattice Flower Accents match the Lattice Flower Square Panel die (FRA9553) to create easy layering options. Or use them alone as fun embellishments. Each measures 1.2" x 1.2". Frantic Stamper Precision Dies are made in the USA. Compatible with all leading consumer die cutting machines.

See More Items Like This
 

Go to Page: 1  2  3  4  5  6  7  8  9  10  

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!