A funny llama wishes you a spittin' good holiday! Cling Rubber Sets are available only in Stampendous Cling Rubber. Made in the USA they contain four stamps that work together to make a whole charming card or tag.
Cross stitch kit featuring a zebra holding a Halloween jack o lantern. This cross stitch kit contains presorted thread, 16 count white Aida fabric, needle, color chart, and instructions. Finished size 5.9" x 7.9".
Duet Dies - This collection coordinates with our "Spring Fling" stamp set. Stamp the image first, line up the die around the outline, hold the die into place with removable tape such as washi tape and then run your plates through the die cutting machine. You can also cut the die first and... Read more
The Autumn Door Accents die set was designed to complement the Front Door Fun die set (FRA10492). In this set, you will find a leafy wreath (1.625" x 1.5"), carved pumpkin (0.75" x 0.875") and topiary (0.75" x 1.625" assembled) to create an Autumn theme front door scene.... Read more
Craft die from Frantic Stamper featuring reindeer antlers, ears, and eyes, with Christmas holly, poinsettias, and pine leaves! Approx. sizes: Assembled reindeer face: 3.5" x 3", Largest greenery branch: 1.875" x 1.5"
You've seen this trend everywhere.... the animal face... Read more
Stamp and die set from Frantic Stamper featuring Christmas angel and nativity wise men! Coordinates with stamp FRAS164.
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
Who's ready for Christmas! This set of two big and bold numbers with a holly pattern measure 2.875" tall. Together, they are 4" wide (2" wide each).
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
This darling Santa is ready to bring you presents down the chimney. We designed him so that he can be used with the Interactive Slider Maker die set (FRA10903) so he can pop in and out of the chimney.
The Santa measures 2.625" x 2.9", and the chimney is 3.875" x 3.3".
It's an elf..... and a shelf...... watching over you this Christmas season. The shelf measures 3.9" x 0.8" and the elf is 2.5" x 3"
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
This set of 6 dies assembles cuts a large sleigh (4" x 2.5") which you can fill with Santa's sack, presents, a darling little doll, and a teddy bear. The Santa's sack measures 1.25" x 1.75"
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
We like snowmen and we cannot lie!!!! The cuter, the better! So here are three, yes three, good sized, cute-as-a-button, snowmen for you. Each measures 2.25" x 3", and each sure to bring a smile!
As with many of our dies, these snowmen are single piece, but with cut-line features.... Read more
Features a Christmas Santa ornament measuring 2.75" x 3.2". It matches the Round Ornament Background die (FRA09997) perfectly, allowing you to cut a matching backing piece.
A 4"x6" clear stamp set containing a large "happy" word stamp (3.125" x 1.55"). You'll have the perfect sentiment for wishing someone a: Happy Birthday, Happy Anniversary, Happy Mother's Day, Happy Father's Day, Happy Friday, Happy retirement, or even Happy everything! You... Read more
Clear stamp from Frantic Stamper featuring a beautiful wreath made of snowflakes, the sentiments "we wish you a", "merry Christmas", "season's greetings", "let it snow", "joy", "believe", and more!
6"x8" clear photopolymer stamp set featuring a unique hand-drawn lined pattern that can be used to make rustic plaid backgrounds or subtle stripes. The set also includes large brushstroke Christmas words with accompanying small mix and match sentiments.
In the Let It Snow set, you will receive seven dies to help you create a layered mitten and snowflake embellishment with a heartfelt sentiment. It would be a gorgeous set to use on cards and tag projects!
In the We Wish You A Merry Christmas set, you will receive seven dies to help you create a layered Christmas tree embellishment with a heartfelt sentiment. It would be a gorgeous set to use on cards and tag projects!
Craft die from Creative Expressions featuring a layered Christmas poinsettia flower! Includes 18 dies. Size: (largest) 2.7 x 2.7 inches (smallest) 0.4 x 0.4 inches.
Add a festive touch to your Christmas and holiday craft projects with the Festive Collection from Creative Expressions. The... Read more
A festive frame featuring Santa's reindeer and the word "Noel". Papercuts Craft Dies designed by Cathie Shuttleworth. Includes 3 dies. Size: 4.7 x 5.9 inches.
Designed by Cathie Shuttleworth, this single die set creates the look of hand cut paper creating great edge image. The single die depicting a lazy Santa?s helper will make fun cards. The die is perfect for scrap booking fun memories and for card making. The die will work beautifully with the other... Read more
Stamp and die set from Sue Wilson featuring the mix-and-match sentiments "Believe", "Dreams", "Do come true", "and Hope", "That you can!", "Twas' the night", "Before Christmas", "In the", and "Magic"!
Stamp and die set from Sue Wilson featuring the mix-and-match sentiments "Greetings", "Marvelous", "Special", "Winter", "Sending you", "Season's", "Heartfelt", "Festive", and "Christmas"!
Stamp and die set from Sue Wilson featuring the following sentiments!
- Seasons
- Winter
- Special
- To you
- Greetings of the
- 'Tis the
- Sparkle for the
- The wonder of the
Size: Bag-approximately 1"H x 5/16"W x 3/16"D, Bottle-1"H x 1/4"W. A bottle of Merlot with a Merry Christmas label and the festive green and red bag is perfect for celebrating the holidays. Please note this is a handcrafted item and measurements are approximate and there may be... Read more
Cling stamp from Stampendous featuring a Halloween zombie girl!
Image measures approximately 2-3/4"X 2-3/4"
. This original design by Fran Seiford is deeply etched and precision cut from premium gray rubber on a 1/8" gray rubber foam backing then mounted on a cling vinyl... Read more
Cling stamp from Stampendous featuring a holiday wreath decorated by ornaments, pinecones, mistletoe, and a huge bow.
Image measures approximately 3.75 X 3.75 inches. This original design by Fran Seiford is deeply etched and precision cut from premium gray rubber on a 1/8" gray rubber... Read more
Stamp and die set from Diecuts With A View featuring a snowman, a candy cane, a gingerbread house, a poinsettia blossom, a deer, a bow, several leaves, a starry wreath, and Santa Claus!
Stamp and die set from Diecuts With A View featuring a Christmas tree with corresponding die, a poinsettia, a peppermint candy, a gnome in a festive hat, the sentiment "We wish you a very merry Christmas", and more!
Diamond painting kit from Diamond Dotz featuring a jolly Christmas Santa Claus!
Your design is created with Diamond-like facets that shimmer in the light! Using the Diamond Dotz stylus, simply pick up a facet and place it onto the sticky design surface. Includes materials and instructions.
Craft die set from Impression Obsession featuring masks, an eyepatch, a top hat, a bow, a tie, and moustaches!
This is a set of 10 dies. The hat is 1-1/2 x 1-1/2 inches, the tie is 5/8 x 1-1/2 inches, the bow tie is 3/4 x 1 inch, and the glasses are 5/8 x 1-3/4 inches.
Craft die from Impression Obsession featuring Christmas icons. This is a set of 11 dies. The dies are approximately 1 inch. These are US-made steel dies compatible with most table-top die cutting machines.
Die-Versions die featuring the sentiment "Holiday". Die-Versions are thin, chemically-etched dies, made in the USA. They are compatible with most die-cutting systems like Sizzix, Spellbinders, Cuttlebug and Quickutz. They are designed to cut cardstock, vinyl, vellum, foam, thin chipboard, cork, metallic paper, felt and more. Each die comes with a piece of ejection foam.
With design styles that are cute and adorable, fun and whimsical, and classically elegant these universal wafer-thin dies make a great addition to your paper crafting supplies. Cut amazing shapes out of paper, cardstock, adhesive-backed paper, vinyl, vellum and more. They are made from American... Read more
⇅
801-495-0908
Cart
Wishlist
