Country Snowflakes II by Marjorie Massey features 9 cross stitch snowflake patterns filled with reindeer, "Merry Xmas", trees, snowflakes, reindeer, "Joyeux Noel", Poinsettias, & a stitcher!"
Pattern is stitched on 35 ct or 32 ct linen using DMC floss of your choice. Stitch count is 69 x 82.
Prairie Winter cross stitch pattern from Marjorie Massey featuring 6 different charts for the center design - 2 different Winter Motifs, Snowflakes, Angels, Reindeer & "Merry Xmas."
Model stitched on 32 ct. Zweigart Country Mocha linen using DMC thread. Stitch count is 141 x 197.
Cross stitch kit from Panna featuring a Christmas mantle with snowman, alarm clock, teddy bear, and more! This kit contains presorted thread in 41 colors, 16 count white Aida fabric, needle, colour chart, and instructions. 160 x 190 stitches. Uses half cross stitch, counted cross stitch, backstitch. Finished size 11.2" x 13.0".
Cross stitch kit from Panna featuring a rooster at the north pole! This kit contains presorted thread in 42 colors, 14 count blue Aida fabric, needle, colour chart, and instructions. 120 x 157 stitches. Uses half cross stitch, counted cross stitch, backstitch. Finished size 8.7" x 11.2".
Three dies complete our Catnap Christmas Cling Rubber Stamp Set by letting you cut out tons of Kitties for birthday or Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
The associated item QS5001 "Catnap - Christmas Cling Rubber Stamp" is no longer available.
Three dies complete our Puppy Presents Cling Rubber Stamp Set by letting you cut out tons of Puppies for birthday or Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
The associated item QS5002 "Puppy Presents - Christmas Cling Rubber Stamp" is no longer available.
Three dies complete our Kiddos Hugs Cling Rubber Stamp Set by letting you cut out tons of Kiddos for birthday or Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
Three dies complete our Fa La Llama Cling Rubber Stamp Set by letting you cut out tons of Llamas for birthday or Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
Three dies complete our Hippo Gift Cling Rubber Stamp Set by letting you cut out tons of Hippos for birthday or Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
Three dies complete our Sloth Christmas Cling Rubber Stamp Set by letting you cut out tons of Sloths for Christmas. 3 precision, stainless steel dies that leave a narrow border around each image.
The associated item QS5008 "Sloth Christmas - Cling Rubber Stamp" is no longer available.
Three dies complete our Manger Sheep Cling Rubber Stamp Set by letting you cut out tons of Christmas greetings. 3 precision, stainless steel dies that leave a narrow border around each image.
Three dies complete our Batty Cat Cling Rubber Stamp Set by letting you cut out tons of Bats and Cats for Halloween. 3 precision, stainless steel dies that leave a narrow border around each image.
The associated item QS5011 "Batty Cat - Halloween Cling Rubber Stamp" is no longer available.
Three dies complete our Little Red Cling Rubber Stamp Set by letting you cut out tons of Wolves and Little Girls for Halloween or everyday. 3 precision, stainless steel dies that leave a narrow border around each image.
A funny llama wishes you a spittin' good holiday! Cling Rubber Sets are available only in Stampendous Cling Rubber. Made in the USA they contain four stamps that work together to make a whole charming card or tag.
Cross stitch kit featuring a zebra holding a Halloween jack o lantern. This cross stitch kit contains presorted thread, 16 count white Aida fabric, needle, color chart, and instructions. Finished size 5.9" x 7.9".
Duet Dies - This collection coordinates with our "Spring Fling" stamp set. Stamp the image first, line up the die around the outline, hold the die into place with removable tape such as washi tape and then run your plates through the die cutting machine. You can also cut the die first and... Read more
Craft die from Frantic Stamper featuring reindeer antlers, ears, and eyes, with Christmas holly, poinsettias, and pine leaves! Approx. sizes: Assembled reindeer face: 3.5" x 3", Largest greenery branch: 1.875" x 1.5"
You've seen this trend everywhere.... the animal face... Read more
Stamp and die set from Frantic Stamper featuring Christmas angel and nativity wise men! Coordinates with stamp FRAS164.
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
Who's ready for Christmas! This set of two big and bold numbers with a holly pattern measure 2.875" tall. Together, they are 4" wide (2" wide each).
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
This darling Santa is ready to bring you presents down the chimney. We designed him so that he can be used with the Interactive Slider Maker die set (FRA10903) so he can pop in and out of the chimney.
The Santa measures 2.625" x 2.9", and the chimney is 3.875" x 3.3".
It's an elf..... and a shelf...... watching over you this Christmas season. The shelf measures 3.9" x 0.8" and the elf is 2.5" x 3"
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
This set of 6 dies assembles cuts a large sleigh (4" x 2.5") which you can fill with Santa's sack, presents, a darling little doll, and a teddy bear. The Santa's sack measures 1.25" x 1.75"
Our Frantic Stamper Precision Dies work in most consumer table top die cutting machines such as the Cuttlebug, Big Shot, vagabond, Boss Cut, and Grand Calibur.
We like snowmen and we cannot lie!!!! The cuter, the better! So here are three, yes three, good sized, cute-as-a-button, snowmen for you. Each measures 2.25" x 3", and each sure to bring a smile!
As with many of our dies, these snowmen are single piece, but with cut-line features.... Read more
Features a Christmas Santa ornament measuring 2.75" x 3.2". It matches the Round Ornament Background die (FRA09997) perfectly, allowing you to cut a matching backing piece.
A 4"x6" clear stamp set containing a large "happy" word stamp (3.125" x 1.55"). You'll have the perfect sentiment for wishing someone a: Happy Birthday, Happy Anniversary, Happy Mother's Day, Happy Father's Day, Happy Friday, Happy retirement, or even Happy everything! You... Read more
Clear stamp from Frantic Stamper featuring a beautiful wreath made of snowflakes, the sentiments "we wish you a", "merry Christmas", "season's greetings", "let it snow", "joy", "believe", and more!
6"x8" clear photopolymer stamp set featuring a unique hand-drawn lined pattern that can be used to make rustic plaid backgrounds or subtle stripes. The set also includes large brushstroke Christmas words with accompanying small mix and match sentiments.
In the Let It Snow set, you will receive seven dies to help you create a layered mitten and snowflake embellishment with a heartfelt sentiment. It would be a gorgeous set to use on cards and tag projects!
In the We Wish You A Merry Christmas set, you will receive seven dies to help you create a layered Christmas tree embellishment with a heartfelt sentiment. It would be a gorgeous set to use on cards and tag projects!
Clear stamp and die set from Gemini featuring reindeer, "Merry", "Christmas to you", "Christmas to a deer friend", "wishing you all a", "and bright", "Christmas", and "Eat, drink and be"!
Designed to coordinate with Window Arches Die... Read more
Clear stamp and die set from Gemini featuring Christmas robin bird, "have a holly", "jolly", "seasons tweetings to you and yours", "tis the season to be", "wishing you a", and more!
Designed to coordinate with Window Arches Die GEM-ELE-WARCH. Simply... Read more
Cling stamp from Stampendous featuring a Halloween zombie girl!
Image measures approximately 2-3/4"X 2-3/4"
. This original design by Fran Seiford is deeply etched and precision cut from premium gray rubber on a 1/8" gray rubber foam backing then mounted on a cling vinyl... Read more
Cling stamp from Stampendous featuring a holiday wreath decorated by ornaments, pinecones, mistletoe, and a huge bow.
Image measures approximately 3.75 X 3.75 inches. This original design by Fran Seiford is deeply etched and precision cut from premium gray rubber on a 1/8" gray rubber... Read more
Stamp and die set from Diecuts With A View featuring a snowman, a candy cane, a gingerbread house, a poinsettia blossom, a deer, a bow, several leaves, a starry wreath, and Santa Claus!
Stamp and die set from Diecuts With A View featuring a Christmas tree with corresponding die, a poinsettia, a peppermint candy, a gnome in a festive hat, the sentiment "We wish you a very merry Christmas", and more!
Diamond painting kit from Diamond Dotz featuring a jolly Christmas Santa Claus!
Your design is created with Diamond-like facets that shimmer in the light! Using the Diamond Dotz stylus, simply pick up a facet and place it onto the sticky design surface. Includes materials and instructions.
Craft die set from Impression Obsession featuring masks, an eyepatch, a top hat, a bow, a tie, and moustaches!
This is a set of 10 dies. The hat is 1-1/2 x 1-1/2 inches, the tie is 5/8 x 1-1/2 inches, the bow tie is 3/4 x 1 inch, and the glasses are 5/8 x 1-3/4 inches.
Craft die from Impression Obsession featuring Christmas icons. This is a set of 11 dies. The dies are approximately 1 inch. These are US-made steel dies compatible with most table-top die cutting machines.
801-495-0908
⇅
Cart
Wishlist
