Yardage Quilt Interfacing, Stabilizers, and Adhesives Page 2

Sold in 1 yard increments.

Pellon 835 Stitch-N-Tear Lite is a lightweight embroidery stabilizer that tears away easily without pulling or distorting stitching. Use multiple layers for added stability. Excellent for projects such as decorative stitching, buttonholes, monogramming &... Read more about 835 Stitch-N-Tear Lite Embroidery Stabilizer - Yardage

Sold in 1 yard increments.

Pellon's 988 is a sew-in fleece interfacing that adds full, lofty body to fabric. Use for padded or quilted apparel and crafts.

White
100% Polyester
45" by-the-yard width
Adds full, lofty body to fabric
Sewing Machine Safe
Machine wash warm, delicate cycle. Tumble dry low or dry clean.

All purpose interfacing adds support and body. Works well with heavier fabrics. Sold in 1 yard increments.

Sold in 1 yard increments.

THERM 0 WEB-Heat n Bond Iron-On Fusible Interfacing. Weft soft weight interfacing is great for adding strength and stretch to all types of fabrics. Made of 100% polyester. Machine washable.

Create a strong bond between layers of fabric without adding weight or stiffness to a project. Paper backed fusible web for a wrinkle-free application. 17"

Sold in 1 yard increments.

Fusible, non-woven interfacing with crosswise give for firm support. 70% polyester, 30% rayon.

Sold in 1 yard increments.

Sold in 1 yard increments

Sold in 1 yard increments.

When you need more surface area buying by the bolt is your best bet! Sulky Soft ‘n Sheer stabilizer is an acid free permanent, lightweight, textured, non-woven nylon that has excellent stretch resistance and is ultra-soft next to your skin. It provides... Read more about Soft'n Sheer Cut-Away Permanent Stabilizer - Yardage

Because all Sulky Embroidery Stabilizers (except Tender Touch) are made from non-woven materials they don't stretch in any direction. On mid-weight knits, use one layer of Soft 'n Sheer Extra rather than two layers of the regular Soft 'n Sheer It is perfect for delicate fabrics that don?t like high... Read more about Soft N Sheer Stabilizer - Extra 20" - Yardage

Non-woven, tear away stabilizer to create embroidery and applique designs on knit, napped, quilted, light and dark fabric. 75% Rayon/ 25% Polyester. Sew-In.

Perfect for embroidery, where you need to stabilize the fabric so that it doesn't pull and go out of shape when you are sewing. Simply tear-away afterwards.

100% polypropylene
20" wide
White
Caution: Will melt when ironed at high heat. Test before irnoning.

Sold in one yard increments.

Craf-Tex Plus is a heavyweight double sided fusible stabilizer made of 100% polyester perfect to add to your craft projects! Ideal to use when creating handbags, fabric boxes, bowls, accessories, placemats, and costumes.

Sold in 1 yard increments.

Bosal Craf-Tex is a low melt web on release paper, ideal for seams, quilting, applique, and crafting. Use this adhesive to fuse fabrics to book covers, foam, batting, and other fabrics! Made of 100% Polyamide.

Sold in 1 yard increments.

HeatnBond Soft Stretch Ultra is a NO SEW, lightweight iron-on web adhesive specially designed to move with your stretch fabric while maintaining a strong bond! There is no added bulk and maintains a soft hand after fusing. Great to use with knits, stretch denim,... Read more about Heat'n Bond Ultra SoftStretch 17" - Adhesive Yardage

Sold by the yard.

Pellon 360 EZ-Stitch is a non-woven, perforated, lightweight stabilizer designed for general machine embroidery. It is suitable for most fabrics. The perforated markings allow you to easily tear-away' any excess without pulling or puckering the stitches. It is quick and... Read more about 360 E-Z Stitch Lightweight Embroidery Stabilizer - Yardage

Sold in 1 yard increments.

40 Pellon Stabilizer Mid-weight is a mid to heavyweight sew-in stabilizer for firm, crisp support. It is great for hat brims, tote bags, and needle craft backings.

Non-Woven
Black
100% Polyester
20" width
Mid- to heavyweight... Read more about 40 Midweight Sew-In Stabilizer - Black - Yardage

The self-adhesive, fabric-like, water soluble stabilizer that can be used as a topper or backing. It holds items in place for hoopless and reversible embroidery. Can be used as a base for machine lace making. It's like magic for turned applique: Stitch it, turn it and stick it. With no paper component, it washes away completely every time! 20"

Sold in 1 yard increments.

Sold in one yard increments.

Bosal's In-R-Form Sew In Stabilizer will curve around your fabric to the desired shape, thereby making it easier to stitch. In-R-Form Sew In stabilizer is laminated to brushed polyester, making it soft and formable. Use In-R-Form Sew In stabilizer when making purses, totes and bags.

58" wide

Sold in 1 yard increments.

Pellon 541 Wash-N-Gone is a lightweight embroidery stabilizer that is terrific for machine embroidery, applique, cut work, and monogramming. It stabilizes the fabric during stitching. The excess can be easily and completely washed away in all water... Read more about 541 Wash-N-Gone Lightweight Embroidery Stabilizer - Yardage

Sold in 1 yard increments.

Stick-N-Washaway is a unique product that combines a pressure sensitive adhesive with a water-soluble stabilizer. The stabilizer will wash away without placing any stress on threadwork and leaves no trace on either side of the project. It is ideal for printed... Read more about 542 Stick-N-Washaway Embroidery Stabilizer - Yardage

Sold in 1 yard increments.

Pellon 551 Sol-U-Film is a water soluble stabilizing backing for embroidery. It is great for machine embroidery, applique, cut-work, and monogramming. It allows fabric to retain its natural hand and is great for stabilizing embroidery on specialty fabrics such... Read more about Sol-U-Film - Embroidery Stabilizing Backing Yardage

Because all Sulky Tear-Away Stabilizers are made from non-woven materials they don't stretch in any direction.. Use Sulky tear-away stabilizers as backings for all types of applique, digitized and free-motion embroidery, edge-stitch support, monogramming, buttonholes, and decorative stitching Using... Read more about Sticky Yards Self-Adhesive Tear Away Stabilizer - Yardage

Sold in 1 yard increments.

Pellon 805 Wonder-Under is the original paper-backed fusible web. It fuses easily in mere seconds and is 100% machine stitchable. The fabric will maintain a soft hand after fusing. Wonder-Under is great for apparel, home decor, and craft projects. It bonds... Read more about 805 Regular Wonder-Under Fusible Web - Yardage

Sold in 1 yard increments.

Pellon 807 Wonder-Web is an unsupported, fusible web that bonds fabric to fabric or any porous surface such as wood and cardboard. It is great for use in a wide range of apparel, home decor, and craft projects. Wonder-Web fuses easily in seconds and retains a... Read more about 807 Wonder-Web Fusible Web - Yardage

Sold in 1 yard increments

Pellon 810 Tru-Grid has an accurate 1" graph that allows you to create, duplicate, alter, and enlarge craft designs. It cuts, sews, and gathers like real fabric. Tru-Grid stays "true" to the straight of grain, is strong yet sheer, can be basted, and... Read more about 810 Tru-Grid 1" Graph - Yardage

Sold in 1 yard increments.

Pellon 815 Red Dot Tracing Material is a non-woven dot graph material. It features an accurate 1" graph, used for scaling up, duplicating, or altering patterns. It is stable in all directions, but light enough in weight to allow for excellent drape.

... Read more about 815 Red Dot Tracing 1" Graph Material - Yardage

Sold in 1 yard increments.

Pellon 82 Two-Sided Fusible Stabilizer is a medium weight, firm, non-woven, fusible stabilizer that provides extra crispness and support. It is fantastic for use in placemats, director chairs, lamp shades, and drapery headers. It is fusible on both sides while... Read more about 82 Medium Weight Two-Sided Fusible Stabilizer - Yardage

Sold in 1 yard increments.

Pellon 821 Quilter's Grid On-Point is a fusible non-woven with a 1" printed grid on-point for precision piecing of quilting projects. It is helpful with the construction of wall hangings and quilts that utilize cut fabric pieces. It makes arranging fabrics... Read more about 821 Quilter's Grid On-Point Fusible Interfacing Yardage

Sold in 1 yard increments.

Pellon 860F Ultra-Weft is a woven, fusible, weft insertion interfacing for traditional soft tailoring and designer drape in lightweight jackets and coats. It was developed for fabrics such as lightweight wool, cashmere, camel hair, and crepe.

... Read more about 860F Ultra Weft Fusible Interfacing - Natural - Yardage

Sold in 1 yard increments.

Pellon 880F Sof-Shape is a fusible, nonwoven, multi-purpose interfacing for light, gentle support in suits, sportswear, and dresses. It will permanently hold a garment's soft, fluid lines and is therefore ideal for fabrics such as crepe, challis, gabardine,... Read more about 880F Sof-Shape Fusible Interfacing - Yardage

Sold in 1 yard increments.

Pellon 987F Fusible Fleece is a one-sided fusible fleece that adds a layer of softness, body, and stability to home decorating, craft and apparel sewing. No Pinning! No Basting! No Sewing! Can be fused to fabric, cardboard, or wood. It is completely sewing... Read more about 987F Fusible Fleece One-Sided Interfacing Black - Yardage

Sold in 1 yard increments.

Pellon EZ-Steam is a pressure sensitive fusible web with a paper backing. The adhesive side aids in the placement of the fusible and gives the versatility of moving the applique into another position until it has been permanently fused to the fabric. The... Read more about EZ-Steam Fusible Web - Yardage

Sold in 1 yard increments.

Pellon HC120F Fusible Hair Canvas is a woven fusible interfacing suitable for garment construction when crisp detail or firm control is desired. It is best for use with medium to heavyweight fabrics and is excellent for use in jackets and coat. Do not use in... Read more about HC120F Fusible Hair Canvas Interfacing - Yardage

100% Cotton iron on fusible interfacing. Machine washable, dryable and dry cleanable.

Sold in 1 yard increments.

HeatnBond non-woven, fusible, featherweight interfacing. Use with sheer or lightweight fabrics when making blouses or dresses. 100% polyester.

Sold in 1 yard increments.

This fusible interfacing is a non-woven, 100% polyester for sewing projects requiring stabilization, reinforcement or to add extra body. Use Light Weight for lighter fabrics such as: chiffon, light cotton, rayon, satin, silk, taffeta and sheer fabrics.

Sold in 1 yard increments.

Sold in 1 yard increments.

Pellon SK135 Sheer-Knit interfacing is a soft sheer fusible tricot interfacing used both for underlining and supple stabilization and support. It is great for use in soft blouses and lingerie, and ideal for sheer to lightweight fabrics.

Woven
... Read more about SK135 Sheer-Knit Fusible Interfacing Black - Yardage

Face-it Soft is great to reinforce purse pockets, delicate design elements, clothing details such as collars and pockets, stabilizing t-shirts and knits for craft projects. Use it when your fabric may be a bit too soft or delicate and needs a little more body. 22". 100% Cotton.

Sold in 1 yard increments.

Face-it Firm medium/heavyweight fusible interfacing stabilizes and strengthens fabrics to five your project structure and shape, but it's not so stiff that it takes over your fabric. Minimal shrinkage. 20". 100% polyester.

Sold in 1 yard increments.

It's forgiving and doesn't hold the fold like those other guys. You can crumple a bag into a ball and it will bounce right back and stand up straight. Use it in place of fleece or batting in a structured bag. Great for table runners and placemats, too. Stiff Stuff = I need some of that stiff stuff... Read more about Stiff Stuff Firm 20" - Yardage