Pellon ES114 Easy-Shaper is a non-woven, fusible interfacing for light to mid-weight fabrics. It adds shape and support to garments, is excellent for use in dresses, and works particularly well with fabrics like challis, chambray, jersey, broadcloth, and... Read more
Pellon Flex-Foam is a lightweight sew-in stabilizer consisting of a layer of foam sandwiched between two layers of soft fabric. It is excellent for use in crafts, accessories, and home decor projects for an elegant finished look. It can be used in place of or in... Read more
StitchnSew Tear-Away PeelnStick Adhesive Embroidery Stabilizer is a PeelnStick adhesive tear-away on a release paper designed for stabilizing delicate fabrics. Great to use for freehand embroidery without a hoop. Designed for ultimate convenience. The tear-away... Read more
Pellon SK135 Sheer-Knit interfacing is a soft sheer fusible tricot interfacing used both for underlining and supple stabilization and support. It is great for use in soft blouses and lingerie, and ideal for sheer to lightweight fabrics.
Face-it Firm medium/heavyweight fusible interfacing stabilizes and strengthens fabrics to five your project structure and shape, but it's not so stiff that it takes over your fabric. Minimal shrinkage. 20". 100% polyester.
Treating fabric with Terial Magic Spray allows fabrics to hold shapes and not fray when cut, sewn or ironed. Single ply fabric is transformed into paper-like sheets that are perfect for all sorts of dimensional uses. Long lasting, yet water soluble. Spray, air dry and iron. 16 ounce spray bottle.
Pellon SF101 Shape-Flex is an all purpose, woven, fusible interfacing. It provides crisp support for collars, cuffs, yokes, pockets, facings, and other detail areas of a garment. It can also add body and permanent stability when used as a backing for needlework and punch embroidery. Shape-Flex is... Read more
You can make heat sensitive adhesive bias tape from any fabric 3/8"--9MM WIDTH. You can make heat sensitive adhesive you like. Makes 3/8" bias tape. bias tape from any fabric you like. The heat sensitive Use with Clover 1/4" fusible web tape item #4031. adhesive tape and the fabric can... Read more
Cut the time and effort involved in pieced designs like watercolor, Bargello, photography quilts and more, while adding stability and uniformity to your block sewing with HTC Quilt-Fuse. Fusible on one side with a 2-inch pre-printed layout grid, Quilt-Fuse is... Read more
Fuse 'n Bind by Nancy Zieman is a fusible tape that makes 1/2" binding. Simply press tape to fabric, fold edges to the center and you are ready to add binding to bags, totes, purses, E-Tablets, paper keepers, clothing and quilts. 6 yards.
There are three totes in one kit and the "Sew On The Line" patterns are printed on a lightweight, durable stabilizer. Simple layer with your fabric selections and secure the stabilizer using temporary adhesive glue stick and then sew on the dotted lines. Complete instructions included. Kit... Read more
Add a little springtime color to your home with my Trellis runner. Simple snowball blocks make the blooms while easy fusible applique connects them with melon leaves.
Stabili-Tee Fusible Interfacing Pack 60"x72" sheets Add just the right amount of stabilization to your next T-shirt quilt! This lightweight, 100% polyester fusible interfacing is made specifically for stretchy, nonwoven T-shirt material, but it works great on wovens such as cotton, too.... Read more
100% polyester, sheer, lightweight iron on tape is 1.5" wide. Create a usable piece of batting from your leftover scraps by fusing the edges together with this tape. It is easy to machine or hand quilt through and it will not gum up your needle. The adhesive is on one side of the tape and the bond is permanent. Machine washable, dryable and dry cleanable after fusing. 15 yards.
With a new and improved formula with a consistent thickness and texture. A heavyweight, firm yet flexible stabilizer without fusing. Easy to cut, mark & sew, steam press to restore or set shapes, machine wash and dry. 100% polyester.
Because all Sulky Tear-Away Stabilizers are made from non-woven materials they don't stretch in any direction. Use Sulky tear-away stabilizers as backings for all types of applique, digitized and free-motion embroidery, edge-stitch support, monogramming, buttonholes, and decorative stitching Ideal... Read more
Sulky Soft n Sheer stabilizer is an acid free permanent, lightweight textured, non-woven nylon that has excellent stretch resistance and is ultra-soft next to your skin. It provides great permanent stability to stitch on lightweight knits and woven fabrics. Excellent stretch resistance eliminates... Read more
Sulky Soft n Sheer stabilizer is an acid free permanent, lightweight textured, non-woven nylon that has excellent stretch resistance and is ultra-soft next to your skin. It provides great permanent stability to stitch on lightweight knits and woven fabrics. Excellent stretch resistance eliminates... Read more
Sulky Soft 'n Sheer Extra stabilizer is a fusible version of our Soft n Sheer stabilizer. It is an acid free permanent, medium weight, textured, iron-on, non-woven nylon that is ideal for dense embroidery designs. Excellent stretch resistance eliminates pulling or sagging for the embroidery design... Read more
Sulky Soft 'n Sheer Extra stabilizer is a fusible version of our Soft 'n Sheer stabilizer. It is an acid free permanent, medium weight, textured, iron-on, non-woven nylon that is ideal for dense embroidery designs. Excellent stretch resistance eliminates pulling or sagging for the embroidery design... Read more
Sulky Cut-Away Plus stabilizer is an acid free permanent, medium weight, non-woven stabilizer with a soft hand and excellent stability for knits and outerwear like jackets, sweaters and sweatshirts. We recommend it as a backing for dense designs, open-weave fabrics with a complex design and... Read more
Sulky Cut-Away Plus stabilizer is an acid free permanent, medium weight, non-woven stabilizer with a soft hand and excellent stability for knits and outerwear like jackets, sweaters and sweatshirts. We recommend it as a backing for dense designs, open-weave fabrics with a complex design and... Read more
Perfect for embroidery, where you need to stabilize the fabric so that it doesn't pull and go out of shape when you are sewing. Simply tear-away afterwards.
100% polypropylene
20" wide
White
Caution: Will melt when ironed at high heat. Test before irnoning.
Used for stabilizing quilt blocks Fusible fleece is designed for added body, padding and support. Used for construction of soft crafts. Lower loft and firmer padding provides ideal support for hand bags tote bags, beach bags and purses. Ideal for creating home decor project requiring a lower loft with added body and support. Great for table runners and place-mats requiring a lower loft profile.
Bosal Craf-Tex is a low melt web on release paper, ideal for seams, quilting, applique, and crafting. Use this adhesive to fuse fabrics to book covers, foam, batting, and other fabrics! Made of 100% Polyamide.
Pellon 360 EZ-Stitch is a non-woven, perforated, lightweight stabilizer designed for general machine embroidery. It is suitable for most fabrics. The perforated markings allow you to easily tear-away' any excess without pulling or puckering the stitches. It is quick and... Read more
Pellon 371 Fuse-N-Tear is an iron-on stabilizer that eliminates the sliding, puckering, and shifting of fabric during machine or hand embroidery. The excess easily tears away, leaving no sticky residue. You can use more than one layer for added strength. It is great for fabric stamping, borders,... Read more
40 Pellon Stabilizer Mid-weight is a mid to heavyweight sew-in stabilizer for firm, crisp support. It is great for hat brims, tote bags, and needle craft backings.
Non-Woven
Black
100% Polyester
20" width
Mid- to heavyweight... Read more
Sulky Super Solvy stabilizer is the perfect temporary stabilizer and transfer agent that dissolves in water. It is twice as thick, heavy and strong as the Original Sulky Solvy. Use as a design template, as a pattern guide and as a stitch support. Super Solvy is the perfect choice when you need a... Read more
Sulky Super Solvy stabilizer is the perfect temporary stabilizer and transfer agent that dissolves in water. It is twice as thick, heavy and strong as the Original Sulky Solvy. Use as a design template, as a pattern guide and as a stitch support. Super Solvy is the perfect choice when you need a... Read more
Sulky Fabri-Solvy stabilizer is a temporary fabric-like water soluble stabilizer. For use as a topper or backing, it has a soft, silky feel against the skin and behaves like fabric during embroidery. It easily washes away, placing no stress on your beautiful thread work. It is unaffected by heat... Read more
Sulky Fabri-Solvy stabilizer is a temporary fabric-like water soluble stabilizer. For use as a topper or backing, it has a soft, silky feel against the skin and behaves like fabric during embroidery. It easily washes away, placing no stress on your beautiful thread work. It is unaffected by heat... Read more
Sulky Ultra Solvy stabilizer is the perfect temporary stabilizer and transfer agent that dissolves in water. Four times as firm, thick, heavy and strong as the Original Sulky Solvy. Use this extra heavy water soluble stabilizer as stitching support for computerized lace embroidery and decorative... Read more
The Craf-Tex double sided fusible stabilizer is perfect when creating the Mini Poppins Bag pattern by Aunties Two Patterns. This packages contains 2 9" x 7" pieces of stabilizer.
Machine wash and dry
Heavyweight
Pattern not included.
This pack includes two pieces of Craf-Tex Double Sided Fusible interfacing measuring 18 3/8" x 18 3/8". Simply add your favorite fashion fabric to both sides, apply a press cloth, and press the entire piece with your iron! These pre-cut pieces are designed to be used with the Scalloped... Read more
This pack contains In-R-Form's unique fusible foam stabilizer to use when creating the Wire Framed Totes by Sew Organized Design! This double-sided interfacing measures 20" x 58".
Laminated to napped tricot
Easy to stitch
Needle friendly
Pattern not included
Craf-Tex Double Sided Fusible Foam Stabilizer Table Runner Pad will add shape and support for your next table runner project. Grab your favorite fabrics and add to both sides of fusible piece then simply apply a press cloth and press the entire piece with your iron.
Sulky Sticky Fabric-Solvy stabilizer combines the convenience of pressure-sensitive adhesive with the flexibility of a water soluble stabilizer. It is a printable temporary self-adhesive, fabric-like stabilizer that is ideal for getting your hand embroidery, punchneedle, cross stitch, quilting or... Read more
Bosal's Ultimate Therm-R-foam is single-sided and fusible, giving you a wide range of applications to use it on. It comes in a heat reflective Silver and is laminated to a napped tricot. It is great for use in Potholders, Oven Mitts, Tea Cozys, Wine Caddies, Lunch Boxes, Stadium Blakets, Bedroom... Read more
Ideal for all types of embroidery, the Stick-Stitch-N-Rinse can prevent your stitches from being buried in plush or heavyweight fabrics! Stick it to your fabric, stitch your design, then rinse the stabilizer away with cold water. It's that simple! Package contains 10 sheets sized 8.5" x 11".