This ruler by Creative Grids will help you create the illusion of curves with this 4" Curvy Log Cabin Trim Tool.
Easy to read black and white markings.
Strip widths and center square measurements are printed right on the tool.
One round of logs is made up of two skinny strips... Read more
Use this Square on Square Trim Tool to create 3" or 6" square on square blocks. The Snail's Trail blocks are now easier than ever. Simple change the colors of the triangles.
Easy to read black and white markings.
Cutting measurements are printed right on the tool.
Trim... Read more
This ruler creates unique four-patch blocks that give the illusion of curves in a quilt.
Easy to read black and white markings.
Use the ruler markings to cut up squares ranging from 4" to 10" making this a pre-cut friendly tool.
Finish block is approximately 3/4" smaller... Read more
Use this Creative Grids quilt ruler to cut a variety of popular shapes from pre-cut 5" squares or from your stash
Easy to read black and white markings.
Cut around the square to create your own 5" squares from your stash.
1/4" grid covers the entire square.
2... Read more
The 3" x 7" Itty-Bitty Eights Rectangle Ruler was designed with the making of miniature quilts in mind.
Easy to read black and white markings.
Dashed 1", 1/4", and 1/8" grid lines ensure you clearly see the edge of your fabric every time.
1/8" markings... Read more
Add a wow factor to any quilt by finishing it with a scalloped border with this Scallop Template by Krista Moser. The Scallop Template includes three sizes of scallops plus a corner unit.
Easy to read black and white markings.
Small scallop recommended for borders ranging from... Read more
Sew together 24 of these 15 degree triangles to create a complete circle; 12 to create a half-circle; or 6 to create a quarter-circle. Create Fans, Dresden Plates, etc. up to a finished size of 18 inches.
The ruler slides easily over the fabric until pressure is applied. Then, our exclusive... Read more
Use the Half Sixty Triangle to cut setting triangles for the Creative Grids 60 degree triangle rulers. Sew two triangles together to create a 60 degree triangle or half rectangle. Or cut a wide variety of shapes that will fit into a 60 degree grid. Maximize the design potential by cutting them from... Read more
This 90 degree triangle cuts quarter triangles up to a finished size of 8 inches. Since the tip is trimmed, all squares and triangles can be cut from the same strip of fabric. Sew four together to create quarter-square triangles up to a finished size of 16 inches. A 1/4 inch dashed line is printed... Read more
Use this 45 degree Kaleidoscope ruler to cut designs created with eight separate 45 degree triangle units such as kaleidoscopes and Dresden Plate blocks. These triangles can also be pieced into a saw tooth border. Cut triangles up to a finished height of 8" to piece blocks that measure up to a... Read more
This Perfect Rectangle ruler cuts half rectangles up to a finished height of 9 inches. Piece perfect rectangles or use it as a companion to the Triangle in a Square ruler to create perfect Triangle in a Square blocks. The ruler slides easily over the fabric until pressure is applied. Then, our... Read more
The Add-A-Quarter Ruler combines the speed of rotary cutting quilt pieces with the accuracy of using templates. Once your templates are made,the Add-A-Quarter will automatically add the customary 1/4" seam allowance to any straight angle and provide a straight edge for you rotary cutter. This tool is also used for trimming seam allowances when foundation piecing. 1" x 6" ruler.
Add A Quarter Plus 6" Ruler simplifies foundation piecing. One edge is tapered for folding back foundation paper and the other side has a 1/4" lip so you can quickly trim the seam allowance with your rotary cutter. 2" x 6" ruler.
Add-An-Eighth ruler with its specially designed 1/8" lip simplifies foundation piecing of miniatures. Works great to trim off excess fabric. Provides straight edge for placement of pieces while adding an 1/8" seam allowance. 1" x 6" ruler.
The Add-A-Quarter combines the speed of rotary cutting quilt pieces with the accuracy of using templates. Once your templates are made,the Add-A-Quarter will automatically add the customary 1/4" seam allowance to any straight angle and provide a straight edge for you rotary cutter. This tool is also used for trimming seam allowances when foundation piecing. 1-1/2" x 12" ruler.
Add A Quarter Plus 12" Ruler simplifies foundation piecing. One edge is tapered for folding back foundation paper and the other side has a 1/4" lip so you can quickly trim the seam allowance with your rotary cutter. 2" x 12" ruler.
Great for those larger projects, the 18" Add-A-Quarter conveniently adds the customary 1/4" seam allowance to any straight angle and provides a straight edge for your rotary cutter. 2-1/2" x 18" ruler.
Introducing One tool for all your quilt binding needs, the "ADD-A- BINDING"! The Add-A-Binding allows quilters to use just this one tool through all the steps of adding a binding to their beautiful quilts. With this tool you can cut 2.24" or 2.5" binding strips trim a 45 degree... Read more
Strip Tube Jr. New Size! This ruler makes half square triangles a breeze by combining brillant engineering with "The Tube Technique". Make half square triangles from 1" to 6-/2".
The 9" Extension Wedge Ruler by Dohney Publications. Use this ruler with the Original 9 Circle Wedge Ruler to create over 20 different quilt patterns. With 74" circular designs and 37" corner fan units, for 40 different projects overall. All patterns are fully diagramed.
This is the versatile mini version of the full-sized Ditch Everything! This one measures 3" x 6" and fits great in your hand. It is designed for stitching in the ditch with smaller blocks and when longer seams and shapes are less present in the quilt top. For machine quilting on a domestic or longarm machine.
Sew straight lines every time with the Dritz Quilting Machine Seam Gauge & Adhesive Guide. This package contains a plastic seam gauge and adhesive guide. The adhesive guide is sure to come handy, no matter what your allowance is and the seam gauge is able to be repositioned with no sticky residue. Easy to use and compact, this tool is ideal for professional and amateur sewers alike.
Non-Slip adhesive circles that can be applied to backs of rulers, stencils, or templates. Two convenient sizes included in each package, 28 count of 1/2" and 15 count of 3/4" discs.
Locating the center of your quilt is easy with the Dritz Longarm Zero Center Tape Measure. With readings on both sides, taking measurements become more convenient. One side of the tape measures 1 inch to 144 inches, while the other side reads 0 to 72 inches in both directions from the center of the... Read more
Use the Dritz Styling Design Ruler to accurately draft, design and alter fabric patterns. This ruler combines a hip curve, French curve, straight ruler and cut-out slots into a multi-functional tool. Style and cut garments with great precision using this handy ruler. Detailed instructions and... Read more
This non-stretch, reinforced fiberglass tape measure has 1/16" markings for accuracy. Includes both metric one one side and inches on the reverse side. This tape measure is white and is 60" long x 3/4" wide.
This non-stretch, reinforced fiberglass tape measure has 1/16" markings for accuracy. With both metric on one side and inches on the reverse side.Comes in blue and is 60" long x 3/4" wide.
The Dritz Styling Design Ruler is a must-have for all sewists. The ruler is an essential tool for making pattern alterations and for drafting and designing patterns. The ruler combines a hip curve, French curve and gridded straight ruler into one multi-functional tool. It is the perfect companion... Read more
The Dritz 24" Hip Curve Ruler is a must-have for all sewists. The ruler is an essential tool for making pattern alterations and for drafting and designing patterns. The ruler is used to create long, softly curved lines. It is the perfect companion for creating adjustments when you are upcycling... Read more
Get the Omnigrid Rectangle Quilting Ruler for your sewing projects. It is a must-have for new and professional quilters alike. Providing outstanding accuracy, this quilting ruler is perfect for measuring, marking and detailed cutting. With its yellow and black marking, the ruler lets you spot the... Read more
Omnigrid 12.5" Square Ruler is perfect for cutting large pieces and squaring up blocks. It has 1" grids marked in 0.125", 0.25" and 0.5" increments and a 45 degree angle in yellow print to stand out against light and dark fabrics.
Three convenient lengths: 4", 6", and 12". Their center lines are exactly 1/4" from both edges of the rulers, providing an excellent reference line for marking 1/4" sewing lines, adding and checking seam allowances and marking 1/4" quilting lines. Do not use with rotary cutters, knives or other cutting instruments, rulers are designed for marking use only.
Omnigrid 4" x 14" Ruler is a perfect tool for cutting fabric of all kinds. It has 1" grids marked in 0.125", 0.25" and 0.5" increments (and a 45-degree diagonal line) in yellow print to stand out against light and dark fabrics.
Omnigrid 15" Square Ruler is perfect for cutting large pieces and squaring up blocks. It has 1" grids marked in 0.125", 0.25" and 0.5" increments and a 45 degree angle in yellow print to stand out against light and dark fabrics.
Omnigrid 1" x 12" Ruler is perfect for measuring and marking applique and quilt seam allowances. It has .125", .25" and .5" increments in yellow print to stand out against light and dark fabrics.
Quilters can use the Omnigrid Rectangle Quilting Ruler to achieve precision fabric cuts and piercings and complete their projects quickly. This quilting ruler is made of high-quality acrylic plastic and features a two-colored, laser-cut grid with 0.002-inch accuracy for easy reading on light and... Read more
Omnigrid 2.5" x 8" Ruler is perfect for cutting strips, shapes and bias pieces. It has 1" grids marked in 0.125", 0.25" and 0.5" increments and 30, 45 and 60 degree angles in yellow print to stand out against light and dark fabrics. This ruler is a great size for sub cutting charm squares, mini charms, and jelly rolls with 45 degree lines for bias cuts.
Omnigrid 2.5" x 2.5" Square Ruler is perfect for cutting small pieces and half square triangles. It has 1" grids marked in .0625", .125", .25" and .5" increments and a 45 degree angle in yellow print to stand out against light and dark fabrics.
The Omnigrid 2 1/2" x 2 1/2" ruler with 1/16" markings is perfect template for miniatures and color wash quilts; it can also be used as a cutting template for squares and to check seam allowance accuracy; its petite size is ideal for hanging on a keychain or lanyard.
The Omnigrid Square Grid Quilting Ruler is a must-have for new and professional quilters alike. Providing outstanding accuracy, this quilting ruler is perfect for measuring, marking and detailed cutting. With its yellow and black marking, the ruler lets you spot the 0.12-inch gird irrespective of... Read more
Omnigrid 6.5" x 24" Ruler is perfect for cutting long strips and multiple angle pieces. It has 1" grids marked in 0.125", 0.25" and 0.5" increments and 30, 45 and 60 degree angles in yellow print to stand out against light and dark fabrics.
801-495-0908
⇅
Cart
Wishlist
Large Spool - #2600 Dove Grey
Large Spool - #2692 Black
Large Spool - #2021 Natural White
Large Spool - #2024 Bright White
Small Spool - #2600 Dove Grey
Small Spool - #2692 Black
Small Spool - #2021 Natural White
Small Spool - #2024 Bright White
Large Spool - #2600 Dove Grey
Large Spool - #2692 Black
Large Spool - #2021 Natural White
Large Spool - #2024 Bright White
Small Spool - #2600 Dove Grey
Small Spool - #2692 Black
Small Spool - #2021 Natural White
Small Spool - #2024 Bright White
Large Spool - #2600 Dove Grey
Large Spool - #2692 Black
Large Spool - #2021 Natural White
Large Spool - #2024 Bright White
Small Spool - #2600 Dove Grey
Small Spool - #2692 Black
Small Spool - #2021 Natural White
Small Spool - #2024 Bright White
